Made MD* libraries (Parola, MAX72XX) project specific, to be able to use the newest software version from github.

2019-02-01 15:21:58 +01:00
parent fe9f25c856
commit c7547144d2
761 changed files with 108577 additions and 2 deletions
--- a/lib/MD_Parola/examples/Parola_Zone_Mesg/Parola_Zone_Mesg.ino
+++ b/lib/MD_Parola/examples/Parola_Zone_Mesg/Parola_Zone_Mesg.ino
@@ -0,0 +1,128 @@
+// Program to demonstrate the MD_Parola library
+//
+// Display messages in the zones. Wait for each zone to display before continuing
+//
+// Animation speed can be controlled using a pot on pin SPEED_IN
+//
+// MD_MAX72XX library can be found at https://github.com/MajicDesigns/MD_MAX72XX
+//
+
+#include <MD_Parola.h>
+#include <MD_MAX72xx.h>
+#include <SPI.h>
+
+// Define the number of devices we have in the chain and the hardware interface
+// NOTE: These pin numbers will probably not work with your hardware and may
+// need to be adapted
+#define HARDWARE_TYPE MD_MAX72XX::PAROLA_HW
+#define MAX_DEVICES 8
+#define MAX_ZONES   4
+#define ZONE_SIZE (MAX_DEVICES/MAX_ZONES)   // integer multiple works best
+
+#define CLK_PIN   13
+#define DATA_PIN  11
+#define CS_PIN    10
+
+// Hardware SPI connection
+MD_Parola P = MD_Parola(HARDWARE_TYPE, CS_PIN, MAX_DEVICES);
+// Arbitrary output pins
+// MD_Parola P = MD_Parola(HARDWARE_TYPE, DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES);
+
+#define SPEED_TIME  25
+#define PAUSE_TIME  1000
+
+// Turn on debug statements to the serial output
+#define DEBUG  0
+
+#if  DEBUG
+#define PRINT(s, x) { Serial.print(F(s)); Serial.print(x); }
+#define PRINTS(x) Serial.print(F(x))
+#define PRINTX(x) Serial.println(x, HEX)
+#else
+#define PRINT(s, x)
+#define PRINTS(x)
+#define PRINTX(x)
+#endif
+
+// Global variables
+uint8_t  curText;
+char	*pc[] =
+{
+  "M1",
+  "M2",
+  "M3",
+  "M4",
+  "M5",
+};
+
+
+uint8_t curFX = 0;
+textEffect_t  effect[] =
+{
+  PA_PRINT,
+  PA_SCAN_HORIZ,
+  PA_SCROLL_LEFT,
+  PA_WIPE,
+  PA_RANDOM,
+  PA_SCROLL_UP_LEFT,
+  PA_SCROLL_UP,
+  PA_FADE,
+  PA_OPENING_CURSOR,
+  PA_GROW_UP,
+  PA_SCROLL_UP_RIGHT,
+  PA_BLINDS,
+  PA_MESH,
+  PA_CLOSING,
+  PA_GROW_DOWN,
+  PA_SCAN_VERT,
+  PA_SCROLL_DOWN_LEFT,
+  PA_WIPE_CURSOR,
+  PA_DISSOLVE,
+  PA_OPENING,
+  PA_CLOSING_CURSOR,
+  PA_SCROLL_DOWN_RIGHT,
+  PA_SCROLL_RIGHT,
+  PA_SLICE,
+  PA_SCROLL_DOWN,
+};
+
+void setup(void)
+{
+#if DEBUG
+  Serial.begin(57600);
+  PRINTS("[Parola Zone Mesg Demo]");
+#endif
+
+  P.begin(MAX_ZONES);
+  P.setInvert(false);
+
+  for (uint8_t i=0; i<MAX_ZONES; i++)
+  {
+    P.setZone(i, ZONE_SIZE*i, (ZONE_SIZE*(i+1))-1);
+    PRINT("\nZ", i);
+    PRINT(" from ", ZONE_SIZE*i);
+    PRINT(" to ", (ZONE_SIZE*(i+1))-1);
+  }
+}
+
+void loop(void)
+{
+  static uint8_t  curZone = 0;
+  uint8_t inFX = ++curFX % ARRAY_SIZE(effect);
+  uint8_t outFX = ++curFX % ARRAY_SIZE(effect);
+
+  PRINT("\nNew Z", curZone);
+  PRINT(": ", pc[curText]);
+  PRINT(" @ ", millis());
+  P.displayZoneText(curZone, pc[curText], PA_CENTER, SPEED_TIME, PAUSE_TIME, effect[inFX], effect[outFX]);
+
+  // Check for individual zone completion. Note that we check the status of the zone rather than use the
+  // return status of the displayAnimate() method as the other unused zones are completed, but we
+  // still need to call it to run the animations.
+  while (!P.getZoneStatus(curZone))
+    P.displayAnimate();
+
+  // increment for next time
+  curText = ++curText % ARRAY_SIZE(pc);
+  curZone = ++curZone % MAX_ZONES;
+}