// RadioHead.h // Author: Mike McCauley (mikem@airspayce.com) DO NOT CONTACT THE AUTHOR DIRECTLY // Copyright (C) 2014 Mike McCauley // $Id: RadioHead.h,v 1.56 2016/07/07 00:02:53 mikem Exp mikem $ /// \mainpage RadioHead Packet Radio library for embedded microprocessors /// /// This is the RadioHead Packet Radio library for embedded microprocessors. /// It provides a complete object-oriented library for sending and receiving packetized messages /// via a variety of common data radios and other transports on a range of embedded microprocessors. /// /// The version of the package that this documentation refers to can be downloaded /// from http://www.airspayce.com/mikem/arduino/RadioHead/RadioHead-1.61.zip /// You can find the latest version at http://www.airspayce.com/mikem/arduino/RadioHead /// /// You can also find online help and discussion at /// http://groups.google.com/group/radiohead-arduino /// Please use that group for all questions and discussions on this topic. /// Do not contact the author directly, unless it is to discuss commercial licensing. /// Before asking a question or reporting a bug, please read /// - http://en.wikipedia.org/wiki/Wikipedia:Reference_desk/How_to_ask_a_software_question /// - http://www.catb.org/esr/faqs/smart-questions.html /// - http://www.chiark.greenend.org.uk/~shgtatham/bugs.html /// /// \par Overview /// /// RadioHead consists of 2 main sets of classes: Drivers and Managers. /// /// - Drivers provide low level access to a range of different packet radios and other packetized message transports. /// - Managers provide high level message sending and receiving facilities for a range of different requirements. /// /// Every RadioHead program will have an instance of a Driver to provide access to the data radio or transport, /// and a Manager that uses that driver to send and receive messages for the application. The programmer is required /// to instantiate a Driver and a Manager, and to initialise the Manager. Thereafter the facilities of the Manager /// can be used to send and receive messages. /// /// It is also possible to use a Driver on its own, without a Manager, although this only allows unaddressed, /// unreliable transport via the Driver's facilities. /// /// In some specialised use cases, it is possible to instantiate more than one Driver and more than one Manager. /// /// A range of different common embedded microprocessor platforms are supported, allowing your project to run /// on your choice of processor. /// /// Example programs are included to show the main modes of use. /// /// \par Drivers /// /// The following Drivers are provided: /// /// - RH_RF22 /// Works with Hope-RF /// RF22B and RF23B based transceivers, and compatible chips and modules, /// including the RFM22B transceiver module such as /// this bare module: http://www.sparkfun.com/products/10153 /// and this shield: http://www.sparkfun.com/products/11018 /// and this board: http://www.anarduino.com/miniwireless /// and RF23BP modules such as: http://www.anarduino.com/details.jsp?pid=130 /// Supports GFSK, FSK and OOK. Access to other chip /// features such as on-chip temperature measurement, analog-digital /// converter, transmitter power control etc is also provided. /// /// - RH_RF24 /// Works with Silicon Labs Si4460/4461/4463/4464 family of transceivers chip, and the equivalent /// HopeRF RF24/26/27 family of chips and the HopeRF RFM24W/26W/27W modules. /// Supports GFSK, FSK and OOK. Access to other chip /// features such as on-chip temperature measurement, analog-digital /// converter, transmitter power control etc is also provided. /// /// - RH_RF69 /// Works with Hope-RF /// RF69B based radio modules, such as the RFM69 module, (as used on the excellent Moteino and Moteino-USB /// boards from LowPowerLab http://lowpowerlab.com/moteino/ ) /// and compatible chips and modules such as RFM69W, RFM69HW, RFM69CW, RFM69HCW (Semtech SX1231, SX1231H). /// Also works with Anarduino MiniWireless -CW and -HW boards http://www.anarduino.com/miniwireless/ including /// the marvellous high powered MinWireless-HW (with 20dBm output for excellent range). /// Supports GFSK, FSK. /// /// - RH_NRF24 /// Works with Nordic nRF24 based 2.4GHz radio modules, such as nRF24L01 and others. /// Also works with Hope-RF RFM73 /// and compatible devices (such as BK2423). nRF24L01 and RFM73 can interoperate /// with each other. /// /// - RH_NRF905 /// Works with Nordic nRF905 based 433/868/915 MHz radio modules. /// /// - RH_NRF51 /// Works with Nordic nRF51 compatible 2.4 GHz SoC/devices such as the nRF51822. /// /// - RH_RF95 /// Works with Semtech SX1276/77/78/79, Modtronix inAir4 and inAir9, /// and HopeRF RFM95/96/97/98 and other similar LoRa capable radios. /// Supports Long Range (LoRa) with spread spectrum frequency hopping, large payloads etc. /// FSK/GFSK/OOK modes are not (yet) supported. /// /// - RH_MRF89 /// Works with Microchip MRF89XA and compatible transceivers. /// and modules such as MRF89XAM9A. /// /// - RH_CC110 /// Works with Texas Instruments CC110L transceivers and compatible modules such as Anaren AIR BoosterPack 430BOOST-CC110L /// /// - RH_ASK /// Works with a range of inexpensive ASK (amplitude shift keying) RF transceivers such as RX-B1 /// (also known as ST-RX04-ASK) receiver; TX-C1 transmitter and DR3100 transceiver; FS1000A/XY-MK-5V transceiver; /// HopeRF RFM83C / RFM85. Supports ASK (OOK). /// /// - RH_Serial /// Works with RS232, RS422, RS485, RS488 and other point-to-point and multidropped serial connections, /// or with TTL serial UARTs such as those on Arduino and many other processors, /// or with data radios with a /// serial port interface. RH_Serial provides packetization and error detection over any hardware or /// virtual serial connection. Also builds and runs on Linux and OSX. /// /// - RH_TCP /// For use with simulated sketches compiled and running on Linux. /// Works with tools/etherSimulator.pl to pass messages between simulated sketches, allowing /// testing of Manager classes on Linux and without need for real radios or other transport hardware. /// /// Drivers can be used on their own to provide unaddressed, unreliable datagrams. /// All drivers have the same identical API. /// Or you can use any Driver with any of the Managers described below. /// /// We welcome contributions of well tested and well documented code to support other transports. /// /// \par Managers /// /// The following Mangers are provided: /// /// - RHDatagram /// Addressed, unreliable variable length messages, with optional broadcast facilities. /// /// - RHReliableDatagram /// Addressed, reliable, retransmitted, acknowledged variable length messages. /// /// - RHRouter /// Multi-hop delivery from source node to destination node via 0 or more intermediate nodes, with manual routing. /// /// - RHMesh /// Multi-hop delivery with automatic route discovery and rediscovery. /// /// Any Manager may be used with any Driver. /// /// \par Platforms /// /// A range of platforms is supported: /// /// - Arduino and the Arduino IDE (version 1.0 to 1.6.5 and later) /// Including Diecimila, Uno, Mega, Leonardo, Yun, Due, Zero etc. http://arduino.cc/, Also similar boards such as /// - Moteino http://lowpowerlab.com/moteino/ /// - Anarduino Mini http://www.anarduino.com/mini/ /// - RedBearLab Blend V1.0 http://redbearlab.com/blend/ (with Arduino 1.0.5 and RedBearLab Blend Add-On version 20140701) /// - MoteinoMEGA https://lowpowerlab.com/shop/moteinomega /// (with Arduino 1.0.5 and the MoteinoMEGA Arduino Core /// https://github.com/LowPowerLab/Moteino/tree/master/MEGA/Core) /// - ESP8266 on Arduino IDE and Boards Manager per https://github.com/esp8266/Arduino /// Tested using Arduino 1.6.8 with esp8266 by ESP8266 Community version 2.1.0 /// Examples serial_reliable_datagram_* and ask_* are shown to work. /// CAUTION: The GHz radio included in the ESP8266 is /// not yet supported. /// - etc. /// /// - ChipKIT Core with Arduino IDE on any ChipKIT Core supported Digilent processor (tested on Uno32) /// http://chipkit.net/wiki/index.php?title=ChipKIT_core /// /// - Maple and Flymaple boards with libmaple and the Maple-IDE development environment /// http://leaflabs.com/devices/maple/ and http://www.open-drone.org/flymaple /// /// - Teensy including Teensy 3.1 and earlier built using Arduino IDE 1.0.5 to 1.6.4 and later with /// teensyduino addon 1.18 to 1.23 and later. /// http://www.pjrc.com/teensy /// /// - Particle Photon https://store.particle.io/collections/photon and ARM3 based CPU with built-in /// Wi-Fi transceiver and extensive IoT software suport. RadioHead does not support the built-in transceiver /// bt can be used to control other SPI based radios, Serial ports etc. /// See below for details on how to build RadioHead for Photon /// /// - ATtiny built using Arduino IDE 1.0.5 with the arduino-tiny support from https://code.google.com/p/arduino-tiny/ /// and Digispark built with Arduino 1.6.5. /// (Caution: these are very small processors and not all RadioHead features may be available, depending on memory requirements) /// /// - nRF51 compatible Arm chips such as nRF51822 with Arduino 1.6.4 and later using the procedures /// in http://redbearlab.com/getting-started-nrf51822/ /// /// - Raspberry Pi /// Uses BCM2835 library for GPIO http://www.airspayce.com/mikem/bcm2835/ /// Currently works only with RH_NRF24 driver or other drivers that do not require interrupt support. /// Contributed by Mike Poublon. /// /// - Linux and OSX /// Using the RHutil/HardwareSerial class, the RH_Serial driver and any manager will /// build and run on Linux and OSX. These can be used to build programs that talk securely and reliably to /// Arduino and other processors or to other Linux or OSX hosts on a reliable, error detected datagram /// protocol over a serial line. /// /// Other platforms are partially supported, such as Generic AVR 8 bit processors, MSP430. /// We welcome contributions that will expand the range of supported platforms. /// /// RadioHead is available (through the efforts of others) /// for PlatformIO. PlatformIO is a cross-platform code builder and the missing library manager. /// http://platformio.org/#!/lib/show/124/RadioHead /// /// \par History /// /// RadioHead was created in April 2014, substantially based on code from some of our other earlier Radio libraries: /// /// - RHMesh, RHRouter, RHReliableDatagram and RHDatagram are derived from the RF22 library version 1.39. /// - RH_RF22 is derived from the RF22 library version 1.39. /// - RH_RF69 is derived from the RF69 library version 1.2. /// - RH_ASK is based on the VirtualWire library version 1.26, after significant conversion to C++. /// - RH_Serial was new. /// - RH_NRF24 is based on the NRF24 library version 1.12, with some significant changes. /// /// During this combination and redevelopment, we have tried to retain all the processor dependencies and support from /// the libraries that were contributed by other people. However not all platforms can be tested by us, so if you /// find that support from some platform has not been successfully migrated, please feel free to fix it and send us a /// patch. /// /// Users of RHMesh, RHRouter, RHReliableDatagram and RHDatagram in the previous RF22 library will find that their /// existing code will run mostly without modification. See the RH_RF22 documentation for more details. /// /// \par Installation /// /// Install in the usual way: unzip the distribution zip file to the libraries /// sub-folder of your sketchbook. /// The example sketches will be visible in in your Arduino, mpide, maple-ide or whatever. /// http://arduino.cc/en/Guide/Libraries /// /// \par Building for Particle Photon /// /// The Photon is not supported by the Arduino IDE, so it takes a little effort to set up a build environment. /// Heres what we did to enable building of RadioHead example sketches on Linux, /// but there are other ways to skin this cat. /// Basic reference for getting stated is: http://particle-firmware.readthedocs.org/en/develop/build/ /// - Download the ARM gcc cross compiler binaries and unpack it in a suitable place: /// \code /// cd /tmp /// wget https://launchpad.net/gcc-arm-embedded/5.0/5-2015-q4-major/+download/gcc-arm-none-eabi-5_2-2015q4-20151219-linux.tar.bz2 /// tar xvf gcc-arm-none-eabi-5_2-2015q4-20151219-linux.tar.bz2 /// \endcode /// - If dfu-util and friends not installed on your platform, download dfu-util and friends to somewhere in your path /// \code /// cd ~/bin /// wget http://dfu-util.sourceforge.net/releases/dfu-util-0.8-binaries/linux-i386/dfu-util /// wget http://dfu-util.sourceforge.net/releases/dfu-util-0.8-binaries/linux-i386/dfu-suffix /// wget http://dfu-util.sourceforge.net/releases/dfu-util-0.8-binaries/linux-i386/dfu-prefix /// \endcode /// - Download the Particle firmware (contains headers and libraries require to compile Photon sketches) /// to a suitable place: /// \code /// cd /tmp /// wget https://github.com/spark/firmware/archive/develop.zip /// unzip develop.zip /// \endcode /// - Make a working area containing the RadioHead library source code and your RadioHead sketch. You must /// rename the sketch from .pde or .ino to application.cpp /// \code /// cd /tmp /// mkdir RadioHead /// cd RadioHead /// cp /usr/local/projects/arduino/libraries/RadioHead/*.h . /// cp /usr/local/projects/arduino/libraries/RadioHead/*.cpp . /// cp /usr/local/projects/arduino/libraries/RadioHead/examples/cc110/cc110_client/cc110_client.pde application.cpp /// \endcode /// - Edit application.cpp and comment out any #include so it looks like: /// \code /// // #include /// \endcode /// - Connect your Photon by USB. Put it in DFU mode as descibed in Photon documentation. Light should be flashing yellow /// - Compile the RadioHead sketch and install it as the user program (this does not update the rest of the /// Photon firmware, just the user part: /// \code /// cd /tmp/firmware-develop/main /// PATH=$PATH:/tmp/gcc-arm-none-eabi-5_2-2015q4/bin make APPDIR=/tmp/RadioHead all PLATFORM=photon program-dfu /// \endcode /// - You should see RadioHead compile without errors and download the finished sketch into the Photon. /// /// \par Compatible Hardware Suppliers /// /// We have had good experiences with the following suppliers of RadioHead compatible hardware: /// /// - LittleBird http://littlebirdelectronics.com.au in Australia for all manner of Arduinos and radios. /// - LowPowerLab http://lowpowerlab.com/moteino in USA for the excellent Moteino and Moteino-USB /// boards which include Hope-RF RF69B radios on-board. /// - Anarduino and HopeRF USA (http://www.hoperfusa.com and http://www.anarduino.com) who have a wide range /// of HopeRF radios and Arduino integrated modules. /// - SparkFun https://www.sparkfun.com/ in USA who design and sell a wide range of Arduinos and radio modules. /// /// \par Donations /// /// This library is offered under a free GPL license for those who want to use it that way. /// We try hard to keep it up to date, fix bugs /// and to provide free support. If this library has helped you save time or money, please consider donating at /// http://www.airspayce.com or here: /// /// \htmlonly
\endhtmlonly /// /// \par Trademarks /// /// RadioHead is a trademark of AirSpayce Pty Ltd. The RadioHead mark was first used on April 12 2014 for /// international trade, and is used only in relation to data communications hardware and software and related services. /// It is not to be confused with any other similar marks covering other goods and services. /// /// \par Copyright /// /// This software is Copyright (C) 2011-2016 Mike McCauley. Use is subject to license /// conditions. The main licensing options available are GPL V2 or Commercial: /// /// \par Open Source Licensing GPL V2 /// /// This is the appropriate option if you want to share the source code of your /// application with everyone you distribute it to, and you also want to give them /// the right to share who uses it. If you wish to use this software under Open /// Source Licensing, you must contribute all your source code to the open source /// community in accordance with the GPL Version 2 when your application is /// distributed. See http://www.gnu.org/copyleft/gpl.html /// /// \par Commercial Licensing /// /// This is the appropriate option if you are creating proprietary applications /// and you are not prepared to distribute and share the source code of your /// application. Contact info@airspayce.com for details (do not use this address for anything other than /// commercial license enquiries. For all other queries, using the RadioHead mailing list). /// /// \par Revision History /// \version 1.1 2014-04-14
/// Initial public release /// \version 1.2 2014-04-23
/// Fixed various typos.
/// Added links to compatible Anarduino products.
/// Added RHNRFSPIDriver, RH_NRF24 classes to support Nordic NRF24 based radios. /// \version 1.3 2014-04-28
/// Various documentation fixups.
/// RHDatagram::setThisAddress() did not set the local copy of thisAddress. Reported by Steve Childress.
/// Fixed a problem on Teensy with RF22 and RF69, where the interrupt pin needs to be set for input,
/// else pin interrupt doesn't work properly. Reported by Steve Childress and patched by /// Adrien van den Bossche. Thanks.
/// Fixed a problem that prevented RF22 honouring setPromiscuous(true). Reported by Steve Childress.
/// Updated documentation to clarify some issues to do with maximum message lengths /// reported by Steve Childress.
/// Added support for yield() on systems that support it (currently Arduino 1.5.5 and later) /// so that spin-loops can suport multitasking. Suggested by Steve Childress.
/// Added RH_RF22::setGpioReversed() so the reversal it can be configured at run-time after /// radio initialisation. It must now be called _after_ init(). Suggested by Steve Childress.
/// \version 1.4 2014-04-29
/// Fixed further problems with Teensy compatibility for RH_RF22. Tested on Teensy 3.1. /// The example/rf22_* examples now run out of the box with the wiring connections as documented for Teensy /// in RH_RF22.
/// Added YIELDs to spin-loops in RHRouter, RHMesh and RHReliableDatagram, RH_NRF24.
/// Tested RH_Serial examples with Teensy 3.1: they now run out of the box.
/// Tested RH_ASK examples with Teensy 3.1: they now run out of the box.
/// Reduced default SPI speed for NRF24 from 8MHz to 1MHz on Teensy, to improve reliability when /// poor wiring is in use.
/// on some devices such as Teensy.
/// Tested RH_NRF24 examples with Teensy 3.1: they now run out of the box.
/// \version 1.5 2014-04-29
/// Added support for Nordic Semiconductor nRF905 transceiver with RH_NRF905 driver. Also /// added examples for nRF905 and tested on Teensy 3.1 /// \version 1.6 2014-04-30
/// NRF905 examples were missing /// \version 1.7 2014-05-03
/// Added support for Arduino Due. Tested with RH_NRF905, RH_Serial, RH_ASK. /// IMPORTANT CHANGE to interrupt pins on Arduino with RH_RF22 and RH_RF69 constructors: /// previously, you had to specify the interrupt _number_ not the interrupt _pin_. Arduinos and Uno32 /// are now consistent with all other platforms: you must specify the interrupt pin number. Default /// changed to pin 2 (a common choice with RF22 shields). /// Removed examples/maple/maple_rf22_reliable_datagram_client and /// examples/maple/maple_rf22_reliable_datagram_client since the rf22 examples now work out /// of the box with Flymaple. /// Removed examples/uno32/uno32_rf22_reliable_datagram_client and /// examples/uno32/uno32_rf22_reliable_datagram_client since the rf22 examples now work out /// of the box with ChipKit Uno32. /// \version 1.8 2014-05-08
/// Added support for YIELD in Teensy 2 and 3, suggested by Steve Childress.
/// Documentation updates. Clarify use of headers and Flags
/// Fixed misalignment in RH_RF69 between ModemConfigChoice definitions and the implemented choices /// which meant you didnt get the choice you thought and GFSK_Rb55555Fd50 hung the transmitter.
/// Preliminary work on Linux simulator. /// \version 1.9 2014-05-14
/// Added support for using Timer 2 instead of Timer 1 on Arduino in RH_ASK when /// RH_ASK_ARDUINO_USE_TIMER2 is defined. With the kind assistance of /// Luc Small. Thanks!
/// Updated comments in RHReliableDatagram concerning servers, retries, timeouts and delays. /// Fixed an error in RHReliableDatagram where recvfrom return value was not checked. /// Reported by Steve Childress.
/// Added Linux simulator support so simple RadioHead sketches can be compiled and run on Linux.
/// Added RH_TCP driver to permit message passing between simulated sketches on Linux.
/// Added example simulator sketches.
/// Added tools/etherSimulator.pl, a simulator of the 'Luminiferous Ether' that passes /// messages between simulated sketches and can simulate random message loss etc.
/// Fixed a number of typos and improved some documentation.
/// \version 1.10 2014-05-15
/// Added support for RFM73 modules to RH_NRF24. These 2 radios are very similar, and can interoperate /// with each other. Added new RH_NRF24::TransmitPower enums for the RFM73, which has a different /// range of available powers
/// reduced the default SPI bus speed for RH_NRF24 to 1MHz, since so many modules and CPU have problems /// with 8MHz.
/// \version 1.11 2014-05-18
/// Testing RH_RF22 with RFM23BP and 3.3V Teensy 3.1 and 5V Arduinos. /// Updated documentation with respect to GPIO and antenna /// control pins for RFM23. Updated documentation with respect to transmitter power control for RFM23
/// Fixed a problem with RH_RF22 driver, where GPIO TX and RX pins were not configured during /// initialisation, causing poor transmit power and sensitivity on those RF22/RF23 devices where GPIO controls /// the antenna selection pins. /// \version 1.12 2014-05-20
/// Testing with RF69HW and the RH_RF69 driver. Works well with the Anarduino MiniWireless -CW and -HW /// boards http://www.anarduino.com/miniwireless/ including /// the marvellous high powered MinWireless-HW (with 20dBm output for excellent range).
/// Clarified documentation of RH_RF69::setTxPower values for different models of RF69.
/// Added RHReliableDatagram::resetRetransmissions().
/// Retransmission count precision increased to uin32_t.
/// Added data about actual power measurements from RFM22 module.
/// \version 1.13 2014-05-23
/// setHeaderFlags(flags) changed to setHeaderFlags(set, clear), enabling any flags to be /// individually set and cleared by either RadioHead or application code. Requested by Steve Childress.
/// Fixed power output setting for boost power on RF69HW for 18, 19 and 20dBm.
/// Added data about actual power measurements from RFM69W and RFM69HW modules.
/// \version 1.14 2014-05-26
/// RH_RF69::init() now always sets the PA boost back to the default settings, else can get invalid /// PA power modes after uploading new sketches without a power cycle. Reported by Bryan.
/// Added new macros RH_VERSION_MAJOR RH_VERSION_MINOR, with automatic maintenance in Makefile.
/// Improvements to RH_TCP: constructor now honours the server argument in the form "servername:port".
/// Added YIELD to RHReliableDatagram::recvfromAckTimeout. Requested by Steve Childress.
/// Fixed a problem with RH_RF22 reliable datagram acknowledgements that was introduced in version 1.13. /// Reported by Steve Childress.
/// \version 1.15 2014-05-27
/// Fixed a problem with the RadioHead .zip link. /// \version 1.16 2014-05-30
/// Fixed RH_RF22 so that lastRssi() returns the signal strength in dBm. Suggested by Steve Childress.
/// Added support for getLastPreambleTime() to RH_RF69. Requested by Steve Childress.
/// RH_NRF24::init() now checks if there is a device connected and responding, else init() will fail. /// Suggested by Steve Brown.
/// RHSoftwareSPI now initialises default values for SPI pins MOSI = 12, MISO = 11 and SCK = 13.
/// Fixed some problems that prevented RH_NRF24 working with mixed software and hardware SPI /// on different devices: a race condition /// due to slow SPI transfers and fast acknowledgement.
/// \version 1.17 2014-06-02
/// Fixed a debug typo in RHReliableDatagram that was introduced in 1.16.
/// RH_NRF24 now sets default power, data rate and channel in init(), in case another /// app has previously set different values without powerdown.
/// Caution: there are still problems with RH_NRF24 and Software SPI. Do not use.
/// \version 1.18 2014-06-02
/// Improvements to performance of RH_NRF24 statusRead, allowing RH_NRF24 and Software SPI /// to operate on slow devices like Arduino Uno.
/// \version 1.19 2014-06-19
/// Added examples ask_transmitter.pde and ask_receiver.pde.
/// Fixed an error in the RH_RF22 doc for connection of Teensy to RF22.
/// Improved documentation of start symbol bit patterns in RH_ASK.cpp /// \version 1.20 2014-06-24
/// Fixed a problem with compiling on platforms such as ATTiny where SS is not defined.
/// Added YIELD to RHMesh::recvfromAckTimeout().
/// \version 1.21 2014-06-24
/// Fixed an issue in RH_Serial where characters might be lost with back-to-back frames. /// Suggested by Steve Childress.
/// Brought previous RHutil/crc16.h code into mainline RHCRC.cpp to prevent name collisions /// with other similarly named code in other libraries. Suggested by Steve Childress.
/// Fix SPI bus speed errors on 8MHz Arduinos. /// \version 1.22 2014-07-01
/// Update RH_ASK documentation for common wiring connections.
/// Testing RH_ASK with HopeRF RFM83C/RFM85 courtesy Anarduino http://www.anarduino.com/
/// Testing RH_NRF24 with Itead Studio IBoard Pro http://imall.iteadstudio.com/iboard-pro.html /// using both hardware SPI on the ITDB02 Parallel LCD Module Interface pins and software SPI /// on the nRF24L01+ Module Interface pins. Documented wiring required.
/// Added support for AVR 1284 and 1284p, contributed by Peter Scargill. /// Added support for Semtech SX1276/77/78 and HopeRF RFM95/96/97/98 and other similar LoRa capable radios /// in LoRa mode only. Tested with the excellent MiniWirelessLoRa from /// Anarduino http://www.anarduino.com/miniwireless
/// \version 1.23 2014-07-03
/// Changed the default modulation for RH_RF69 to GFSK_Rb250Fd250, since the previous default /// was not very reliable.
/// Documented RH_RF95 range tests.
/// Improvements to RH_RF22 RSSI readings so that lastRssi correctly returns the last message in dBm.
/// \version 1.24 2014-07-18 /// Added support for building RadioHead for STM32F4 Discovery boards, using the native STM Firmware libraries, /// in order to support Codec2WalkieTalkie (http://www.airspayce.com/mikem/Codec2WalkieTalkie) /// and other projects. See STM32ArduinoCompat.
/// Default modulation for RH_RF95 was incorrectly set to a very slow Bw125Cr48Sf4096 /// \version 1.25 2014-07-25 /// The available() function will longer terminate any current transmission, and force receive mode. /// Now, if there is no unprocessed incoming message and an outgoing message is currently being transmitted, /// available() will return false.
/// RHRouter::sendtoWait(uint8_t*, uint8_t, uint8_t, uint8_t) renamed to sendtoFromSourceWait due to conflicts /// with new sendtoWait() with optional flags.
/// RHMEsh and RHRouter already supported end-to-end application layer flags, but RHMesh::sendtoWait() /// and RHRouter::sendToWait have now been extended to expose a way to send optional application layer flags. /// \version 1.26 2014-08-12 /// Fixed a Teensy 2.0 compile problem due yield() not available on Teensy < 3.0.
/// Adjusted the algorithm of RH_RF69::temperatureRead() to more closely reflect reality.
/// Added functions to RHGenericDriver to get driver packet statistics: rxBad(), rxGood(), txGood().
/// Added RH_RF69::printRegisters().
/// RH_RF95::printRegisters() was incorrectly printing the register index instead of the address. /// Reported by Phang Moh Lim.
/// RH_RF95, added definitions for some more registers that are usable in LoRa mode.
/// RH_RF95::setTxPower now uses RH_RF95_PA_DAC_ENABLE to achieve 21, 22 and 23dBm.
/// RH_RF95, updated power output measurements.
/// Testing RH_RF69 on Teensy 3.1 with RF69 on PJRC breakout board. OK.
/// Improvements so RadioHead will build under Arduino where SPI is not supported, such as /// ATTiny.
/// Improvements so RadioHead will build for ATTiny using Arduino IDE and tinycore arduino-tiny-0100-0018.zip.
/// Testing RH_ASK on ATTiny85. Reduced RAM footprint. /// Added helpful documentation. Caution: RAM memory is *very* tight on this platform.
/// RH_RF22 and RH_RF69, added setIdleMode() function to allow the idle mode radio operating state /// to be controlled for lower idle power consumption at the expense of slower transitions to TX and RX.
/// \version 1.27 2014-08-13 /// All RH_RF69 modulation schemes now have data whitening enabled by default.
/// Tested and added a number of OOK modulation schemes to RH_RF69 Modem config table.
/// Minor improvements to a number of the faster RH_RF69 modulation schemes, but some slower ones /// are still not working correctly.
/// \version 1.28 2014-08-20 /// Added new RH_RF24 driver to support Si446x, RF24/26/26, RFM24/26/27 family of transceivers. /// Tested with the excellent /// Anarduino Mini and RFM24W and RFM26W with the generous assistance of the good people at /// Anarduino http://www.anarduino.com. /// \version 1.29 2014-08-21 /// Fixed a compile error in RH_RF24 introduced at the last minute in hte previous release.
/// Improvements to RH_RF69 modulation schemes: now include the AFCBW in teh ModemConfig.
/// ModemConfig RH_RF69::FSK_Rb2Fd5 and RH_RF69::GFSK_Rb2Fd5 are now working.
/// \version 1.30 2014-08-25 /// Fixed some compile problems with ATtiny84 on Arduino 1.5.5 reported by Glen Cook.
/// \version 1.31 2014-08-27 /// Changed RH_RF69 FSK and GFSK modulations from Rb2_4Fd2_4 to Rb2_4Fd4_8 and FSK_Rb4_8Fd4_8 to FSK_Rb4_8Fd9_6 /// since the previous ones were unreliable (they had modulation indexes of 1).
/// \version 1.32 2014-08-28 /// Testing with RedBearLab Blend board http://redbearlab.com/blend/. OK.
/// Changed more RH_RF69 FSK and GFSK slowish modulations to have modulation index of 2 instead of 1. /// This required chnaging the symbolic names.
/// \version 1.33 2014-09-01 /// Added support for sleep mode in RHGeneric driver, with new mode /// RHModeSleep and new virtual function sleep().
/// Added support for sleep to RH_RF69, RH_RF22, RH_NRF24, RH_RF24, RH_RF95 drivers.
/// \version 1.34 2014-09-19 /// Fixed compile errors in example rf22_router_test.
/// Fixed a problem with RH_NRF24::setNetworkAddress, also improvements to RH_NRF24 register printing. /// Patched by Yveaux.
/// Improvements to RH_NRF24 initialisation for version 2.0 silicon.
/// Fixed problem with ambigiguous print call in RH_RFM69 when compiling for Codec2.
/// Fixed a problem with RH_NRF24 on RFM73 where the LNA gain was not set properly, reducing the sensitivity /// of the receiver. /// \version 1.35 2014-09-19 /// Fixed a problem with interrupt setup on RH_RF95 with Teensy3.1. Reported by AD.
/// \version 1.36 2014-09-22 /// Improvements to interrupt pin assignments for __AVR_ATmega1284__ and__AVR_ATmega1284P__, provided by /// Peter Scargill.
/// Work around a bug in Arduino 1.0.6 where digitalPinToInterrupt is defined but NOT_AN_INTERRUPT is not.
/// \version 1.37 2014-10-19 /// Updated doc for connecting RH_NRF24 to Arduino Mega.
/// Changes to RHGenericDriver::setHeaderFlags(), so that the default for the clear argument /// is now RH_FLAGS_APPLICATION_SPECIFIC, which is less surprising to users. /// Testing with the excellent MoteinoMEGA from LowPowerLab /// https://lowpowerlab.com/shop/moteinomega with on-board RFM69W. /// \version 1.38 2014-12-29 /// Fixed compile warning on some platforms where RH_RF24::send and RH_RF24::writeTxFifo /// did not return a value.
/// Fixed some more compiler warnings in RH_RF24 on some platforms.
/// Refactored printRegisters for some radios. Printing to Serial /// is now controlled by the definition of RH_HAVE_SERIAL.
/// Added partial support for ARM M4 w/CMSIS with STM's Hardware Abstraction lib for /// Steve Childress.
/// \version 1.39 2014-12-30 /// Fix some compiler warnings under IAR.
/// RH_HAVE_SERIAL and Serial.print calls removed for ATTiny platforms.
/// \version 1.40 2015-03-09 /// Added notice about availability on PlatformIO, thanks to Ivan Kravets.
/// Fixed a problem with RH_NRF24 where short packet lengths would occasionally not be trasmitted /// due to a race condition with RH_NRF24_TX_DS. Reported by Mark Fox.
/// \version 1.41 2015-03-29 /// RH_RF22, RH_RF24, RH_RF69 and RH_RF95 improved to allow driver.init() to be called multiple /// times without reallocating a new interrupt, allowing the driver to be reinitialised /// after sleeping or powering down. /// \version 1.42 2015-05-17 /// Added support for RH_NRF24 driver on Raspberry Pi, using BCM2835 /// library for GPIO pin IO. Contributed by Mike Poublon.
/// Tested RH_NRF24 module with NRF24L01+PA+LNA SMA Antenna Wireless Transceiver modules /// similar to: http://www.elecfreaks.com/wiki/index.php?title=2.4G_Wireless_nRF24L01p_with_PA_and_LNA /// works with no software changes. Measured max power output 18dBm.
/// \version 1.43 2015-08-02 /// Added RH_NRF51 driver to support Nordic nRF51 family processor with 2.4GHz radio such /// as nRF51822, to be built on Arduino 1.6.4 and later. Tested with RedBearLabs nRF51822 board /// and BLE Nano kit
/// \version 1.44 2015-08-08 /// Fixed errors with compiling on some platforms without serial, such as ATTiny. /// Reported by Friedrich Müller.
/// \version 1.45 2015-08-13 /// Added support for using RH_Serial on Linux and OSX (new class RHutil/HardwareSerial /// encapsulates serial ports on those platforms). Example examples/serial upgraded /// to build and run on Linux and OSX using the tools/simBuild builder. /// RHMesh, RHRouter and RHReliableDatagram updated so they can use RH_Serial without /// polling loops on Linux and OSX for CPU efficiency.
/// \version 1.46 2015-08-14 /// Amplified some doc concerning Linux and OSX RH_Serial. Added support for 230400 /// baud rate in HardwareSerial.
/// Added sample sketches nrf51_audio_tx and nrf51_audio_rx which show how to /// build an audio TX/RX pair with RedBear nRF51822 boards and a SparkFun MCP4725 DAC board. /// Uses the built-in ADC of the nRF51822 to sample audio at 5kHz and transmit packets /// to the receiver which plays them via the DAC.
/// \version 1.47 2015-09-18 /// Removed top level Makefile from distribution: its only used by the developer and /// its presence confuses some people.
/// Fixed a problem with RHReliableDatagram with some versions of Raspberry Pi random() that causes /// problems: random(min, max) sometimes exceeds its max limit. /// \version 1.48 2015-09-30 /// Added support for Arduino Zero. Tested on Arduino Zero Pro. /// \version 1.49 2015-10-01 /// Fixed problems that prevented interrupts working correctly on Arduino Zero and Due. /// Builds and runs with 1.6.5 (with 'Arduino SAMD Boards' for Zero version 1.6.1) from arduino.cc. /// Arduino version 1.7.7 from arduino.org is not currently supported. /// \version 1.50 2015-10-25 /// Verified correct building and operation with Arduino 1.7.7 from arduino.org. /// Caution: You must burn the bootloader from 1.7.7 to the Arduino Zero before it will /// work with Arduino 1.7.7 from arduino.org. Conversely, you must burn the bootloader from 1.6.5 /// to the Arduino Zero before it will /// work with Arduino 1.6.5 from arduino.cc. Sigh. /// Fixed a problem with RH_NRF905 that prevented the power and frequency ranges being set /// properly. Reported by Alan Webber. /// \version 1.51 2015-12-11 /// Changes to RH_RF6::setTxPower() to be compatible with SX1276/77/78/79 modules that /// use RFO transmitter pins instead of PA_BOOST, such as the excellent /// Modtronix inAir4 http://modtronix.com/inair4.html /// and inAir9 modules http://modtronix.com/inair9.html. With the kind assistance of /// David from Modtronix. /// \version 1.52 2015-12-17 /// Added RH_MRF89 module to suport Microchip MRF89XA and compatible transceivers. /// and modules.
/// \version 1.53 2016-01-02 /// Added RH_CC110 module to support Texas Instruments CC110L and compatible transceivers and modules.
/// \version 1.54 2016-01-29 /// Added support for ESP8266 processor on Arduino IDE. Examples serial_reliable_datagram_* are shown to work. /// CAUTION: SPI not supported yet. Timers used by RH_ASK are not tested. /// The GHz radio included in the ESP8266 is not yet supported. /// \version 1.55 2016-02-12 /// Added macros for htons() and friends to RadioHead.h. /// Added example sketch serial_gateway.pde. Acts as a transparent gateway between RH_RF22 and RH_Serial, /// and with minor mods acts as a universal gateway between any 2 RadioHead driver networks. /// Initial work on supporting STM32 F2 on Particle Photon: new platform type defined. /// Fixed many warnings exposed by test building for Photon. /// Particle Photon tested support for RH_Serial, RH_ASK, SPI, RH_CC110 etc. /// Added notes on how to build RadioHead sketches for Photon. /// \version 1.56 2016-02-18 /// Implemented timers for RH_ASK on ESP8266, added some doc on IO pin selection. /// \version 1.57 2016-02-23 /// Fixed an issue reported by S3B, where RH_RF22 would sometimes not clear the rxbufvalid flag. /// \version 1.58 2-16-04-04 /// Tested RH_RF69 with Arduino Due. OK. Updated doc.
/// Added support for all ChipKIT Core supported boards /// http://chipkit.net/wiki/index.php?title=ChipKIT_core /// Tested on ChipKIT Uno32.
/// Digilent Uno32 under the old MPIDE is no longer formally /// supported but may continue to work for some time.
/// \version 1.59 2016-04-12 /// Testing with the excellent Rocket Scream Mini Ultra Pro with the RFM95W and RFM69HCW modules from /// http://www.rocketscream.com/blog/product/mini-ultra-pro-with-radio/ (915MHz versions). Updated /// documentation with hints to suit. Caution: requires Arduino 1.6.8 and Arduino SAMD Boards 1.6.5. /// See also http://www.rocketscream.com/blog/2016/03/10/radio-range-test-with-rfm69hcw/ /// for the vendors tests and range with the RFM69HCW version. /// These boards are highly recommended. They also include battery charging support. /// \version 1.60 2016-06-25 /// Tested with the excellent talk2 Whisper Node boards /// (https://talk2.wisen.com.au/ and https://bitbucket.org/talk2/), /// an Arduino Nano compatible board, which include an on-board RF69 radio, external antenna, /// run on 2xAA batteries and support low power operations. RF69 examples work without modification. /// Added support for ESP8266 SPI, provided by David Skinner. /// \version 1.61 2016-07-07 /// Patch to RH_ASK.cpp for ESP8266, to prevent crashes in interrupt handlers. Patch from Alexander Mamchits. /// /// \author Mike McCauley. DO NOT CONTACT THE AUTHOR DIRECTLY. USE THE MAILING LIST GIVEN ABOVE #ifndef RadioHead_h #define RadioHead_h // Official version numbers are maintained automatically by Makefile: #define RH_VERSION_MAJOR 1 #define RH_VERSION_MINOR 61 // Symbolic names for currently supported platform types #define RH_PLATFORM_ARDUINO 1 #define RH_PLATFORM_MSP430 2 #define RH_PLATFORM_STM32 3 #define RH_PLATFORM_GENERIC_AVR8 4 #define RH_PLATFORM_UNO32 5 #define RH_PLATFORM_UNIX 6 #define RH_PLATFORM_STM32STD 7 #define RH_PLATFORM_STM32F4_HAL 8 #define RH_PLATFORM_RASPI 9 #define RH_PLATFORM_NRF51 10 #define RH_PLATFORM_ESP8266 11 #define RH_PLATFORM_STM32F2 12 #define RH_PLATFORM_CHIPKIT_CORE 13 //////////////////////////////////////////////////// // Select platform automatically, if possible #ifndef RH_PLATFORM #if (MPIDE>=150 && defined(ARDUINO)) // Using ChipKIT Core on Arduino IDE #define RH_PLATFORM RH_PLATFORM_CHIPKIT_CORE #elif defined(MPIDE) // Uno32 under old MPIDE, which has been discontinued: #define RH_PLATFORM RH_PLATFORM_UNO32 #elif defined(NRF51) #define RH_PLATFORM RH_PLATFORM_NRF51 #elif defined(ESP8266) #define RH_PLATFORM RH_PLATFORM_ESP8266 #elif defined(ARDUINO) #define RH_PLATFORM RH_PLATFORM_ARDUINO #elif defined(__MSP430G2452__) || defined(__MSP430G2553__) #define RH_PLATFORM RH_PLATFORM_MSP430 #elif defined(MCU_STM32F103RE) #define RH_PLATFORM RH_PLATFORM_STM32 #elif defined(STM32F2XX) #define RH_PLATFORM RH_PLATFORM_STM32F2 #elif defined(USE_STDPERIPH_DRIVER) #define RH_PLATFORM RH_PLATFORM_STM32STD #elif defined(RASPBERRY_PI) #define RH_PLATFORM RH_PLATFORM_RASPI #elif defined(__unix__) // Linux #define RH_PLATFORM RH_PLATFORM_UNIX #elif defined(__APPLE__) // OSX #define RH_PLATFORM RH_PLATFORM_UNIX #else #error Platform not defined! #endif #endif #if defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtinyX4__) || defined(__AVR_ATtinyX5__) || defined(__AVR_ATtiny2313__) || defined(__AVR_ATtiny4313__) || defined(__AVR_ATtinyX313__) #define RH_PLATFORM_ATTINY #endif //////////////////////////////////////////////////// // Platform specific headers: #if (RH_PLATFORM == RH_PLATFORM_ARDUINO) #if (ARDUINO >= 100) #include #else #include #endif #ifdef RH_PLATFORM_ATTINY #warning Arduino TinyCore does not support hardware SPI. Use software SPI instead. #else #include #define RH_HAVE_HARDWARE_SPI #define RH_HAVE_SERIAL #endif #elif (RH_PLATFORM == RH_PLATFORM_ESP8266) // ESP8266 processor on Arduino IDE #include #include #define RH_HAVE_HARDWARE_SPI #define RH_HAVE_SERIAL #elif (RH_PLATFORM == RH_PLATFORM_MSP430) // LaunchPad specific #include "legacymsp430.h" #include "Energia.h" #include #define RH_HAVE_HARDWARE_SPI #define RH_HAVE_SERIAL #elif (RH_PLATFORM == RH_PLATFORM_UNO32 || RH_PLATFORM == RH_PLATFORM_CHIPKIT_CORE) #include #include #include #define RH_HAVE_HARDWARE_SPI #define memcpy_P memcpy #define RH_HAVE_SERIAL #elif (RH_PLATFORM == RH_PLATFORM_STM32) // Maple, Flymaple etc #include #include #include #include #define RH_HAVE_HARDWARE_SPI // Defines which timer to use on Maple #define MAPLE_TIMER 1 #define PROGMEM #define memcpy_P memcpy #define Serial SerialUSB #define RH_HAVE_SERIAL #elif (RH_PLATFORM == RH_PLATFORM_STM32F2) // Particle Photon with firmware-develop #include #include #include // floor #define RH_HAVE_SERIAL #define RH_HAVE_HARDWARE_SPI #elif (RH_PLATFORM == RH_PLATFORM_STM32STD) // STM32 with STM32F4xx_StdPeriph_Driver #include #include #include #include #include #include #define RH_HAVE_HARDWARE_SPI #define Serial SerialUSB #define RH_HAVE_SERIAL #elif (RH_PLATFORM == RH_PLATFORM_GENERIC_AVR8) #include #include #include #include #include #define RH_HAVE_HARDWARE_SPI #include // For Steve Childress port to ARM M4 w/CMSIS with STM's Hardware Abstraction lib. // See ArduinoWorkarounds.h (not supplied) #elif (RH_PLATFORM == RH_PLATFORM_STM32F4_HAL) #include #include // Also using ST's CubeMX to generate I/O and CPU setup source code for IAR/EWARM, not GCC ARM. #include #include #include #define RH_HAVE_HARDWARE_SPI // using HAL (Hardware Abstraction Libraries from ST along with CMSIS, not arduino libs or pins concept. #elif (RH_PLATFORM == RH_PLATFORM_RASPI) #define RH_HAVE_HARDWARE_SPI #define RH_HAVE_SERIAL #define PROGMEM #include #include //Define SS for CS0 or pin 24 #define SS 8 #elif (RH_PLATFORM == RH_PLATFORM_NRF51) #define RH_HAVE_SERIAL #define PROGMEM #include #elif (RH_PLATFORM == RH_PLATFORM_UNIX) // Simulate the sketch on Linux and OSX #include #define RH_HAVE_SERIAL #include // For htons and friends #else #error Platform unknown! #endif //////////////////////////////////////////////////// // This is an attempt to make a portable atomic block #if (RH_PLATFORM == RH_PLATFORM_ARDUINO) #if defined(__arm__) #include #else #include #endif #define ATOMIC_BLOCK_START ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { #define ATOMIC_BLOCK_END } #elif (RH_PLATFORM == RH_PLATFORM_CHIPKIT_CORE) // UsingChipKIT Core on Arduino IDE #define ATOMIC_BLOCK_START unsigned int __status = disableInterrupts(); { #define ATOMIC_BLOCK_END } restoreInterrupts(__status); #elif (RH_PLATFORM == RH_PLATFORM_UNO32) // Under old MPIDE, which has been discontinued: #include #define ATOMIC_BLOCK_START unsigned int __status = INTDisableInterrupts(); { #define ATOMIC_BLOCK_END } INTRestoreInterrupts(__status); #elif (RH_PLATFORM == RH_PLATFORM_STM32F2) // Particle Photon with firmware-develop #define ATOMIC_BLOCK_START { int __prev = HAL_disable_irq(); #define ATOMIC_BLOCK_END HAL_enable_irq(__prev); } #elif (RH_PLATFORM == RH_PLATFORM_ESP8266) // See hardware/esp8266/2.0.0/cores/esp8266/Arduino.h #define ATOMIC_BLOCK_START { uint32_t __savedPS = xt_rsil(15); #define ATOMIC_BLOCK_END xt_wsr_ps(__savedPS);} #else // TO BE DONE: #define ATOMIC_BLOCK_START #define ATOMIC_BLOCK_END #endif //////////////////////////////////////////////////// // Try to be compatible with systems that support yield() and multitasking // instead of spin-loops // Recent Arduino IDE or Teensy 3 has yield() #if (RH_PLATFORM == RH_PLATFORM_ARDUINO && ARDUINO >= 155 && !defined(RH_PLATFORM_ATTINY)) || (TEENSYDUINO && defined(__MK20DX128__)) #define YIELD yield(); #elif (RH_PLATFORM == RH_PLATFORM_ESP8266) // ESP8266 also hash it #if defined(MONGOOSE_OS) extern void yield(void); #endif #define YIELD yield(); #else #define YIELD #endif //////////////////////////////////////////////////// // digitalPinToInterrupt is not available prior to Arduino 1.5.6 and 1.0.6 // See http://arduino.cc/en/Reference/attachInterrupt #ifndef NOT_AN_INTERRUPT #define NOT_AN_INTERRUPT -1 #endif #ifndef digitalPinToInterrupt #if (RH_PLATFORM == RH_PLATFORM_ARDUINO) && !defined(__arm__) #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) // Arduino Mega, Mega ADK, Mega Pro // 2->0, 3->1, 21->2, 20->3, 19->4, 18->5 #define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : ((p) >= 18 && (p) <= 21 ? 23 - (p) : NOT_AN_INTERRUPT))) #elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) // Arduino 1284 and 1284P - See Manicbug and Optiboot // 10->0, 11->1, 2->2 #define digitalPinToInterrupt(p) ((p) == 10 ? 0 : ((p) == 11 ? 1 : ((p) == 2 ? 2 : NOT_AN_INTERRUPT))) #elif defined(__AVR_ATmega32U4__) // Leonardo, Yun, Micro, Pro Micro, Flora, Esplora // 3->0, 2->1, 0->2, 1->3, 7->4 #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) #else // All other arduino except Due: // Serial Arduino, Extreme, NG, BT, Uno, Diecimila, Duemilanove, Nano, Menta, Pro, Mini 04, Fio, LilyPad, Ethernet etc // 2->0, 3->1 #define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : NOT_AN_INTERRUPT)) #endif #elif (RH_PLATFORM == RH_PLATFORM_UNO32) || (RH_PLATFORM == RH_PLATFORM_CHIPKIT_CORE) // Hmmm, this is correct for Uno32, but what about other boards on ChipKIT Core? #define digitalPinToInterrupt(p) ((p) == 38 ? 0 : ((p) == 2 ? 1 : ((p) == 7 ? 2 : ((p) == 8 ? 3 : ((p) == 735 ? 4 : NOT_AN_INTERRUPT))))) #else // Everything else (including Due and Teensy) interrupt number the same as the interrupt pin number #define digitalPinToInterrupt(p) (p) #endif #endif // On some platforms, attachInterrupt() takes a pin number, not an interrupt number #if (RH_PLATFORM == RH_PLATFORM_ARDUINO) && defined (__arm__) && (defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_SAM_DUE)) #define RH_ATTACHINTERRUPT_TAKES_PIN_NUMBER #endif // Slave select pin, some platforms such as ATTiny do not define it. #ifndef SS #define SS 10 #endif // These defs cause trouble on some versions of Arduino #undef abs #undef round #undef double // Sigh: there is no widespread adoption of htons and friends in the base code, only in some WiFi headers etc // that have a lot of excess baggage #if RH_PLATFORM != RH_PLATFORM_UNIX && !defined(htons) // #ifndef htons // These predefined macros availble on modern GCC compilers #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ // Atmel processors #define htons(x) ( ((x)<<8) | (((x)>>8)&0xFF) ) #define ntohs(x) htons(x) #define htonl(x) ( ((x)<<24 & 0xFF000000UL) | \ ((x)<< 8 & 0x00FF0000UL) | \ ((x)>> 8 & 0x0000FF00UL) | \ ((x)>>24 & 0x000000FFUL) ) #define ntohl(x) htonl(x) #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ // Others #define htons(x) (x) #define ntohs(x) (x) #define htonl(x) (x) #define ntohl(x) (x) #else #error "Dont know how to define htons and friends for this processor" #endif #endif // This is the address that indicates a broadcast #define RH_BROADCAST_ADDRESS 0xff #endif