328 lines
17 KiB
C++
328 lines
17 KiB
C++
// RHRouter.h
|
|
//
|
|
// Author: Mike McCauley (mikem@airspayce.com)
|
|
// Copyright (C) 2011 Mike McCauley
|
|
// $Id: RHRouter.h,v 1.9 2014/08/10 20:55:17 mikem Exp $
|
|
|
|
#ifndef RHRouter_h
|
|
#define RHRouter_h
|
|
|
|
#include "RHReliableDatagram.h"
|
|
|
|
// Default max number of hops we will route
|
|
#define RH_DEFAULT_MAX_HOPS 30
|
|
|
|
// The default size of the routing table we keep
|
|
#define RH_ROUTING_TABLE_SIZE 10
|
|
|
|
// Error codes
|
|
#define RH_ROUTER_ERROR_NONE 0
|
|
#define RH_ROUTER_ERROR_INVALID_LENGTH 1
|
|
#define RH_ROUTER_ERROR_NO_ROUTE 2
|
|
#define RH_ROUTER_ERROR_TIMEOUT 3
|
|
#define RH_ROUTER_ERROR_NO_REPLY 4
|
|
#define RH_ROUTER_ERROR_UNABLE_TO_DELIVER 5
|
|
|
|
// This size of RH_ROUTER_MAX_MESSAGE_LEN is OK for Arduino Mega, but too big for
|
|
// Duemilanova. Size of 50 works with the sample router programs on Duemilanova.
|
|
#define RH_ROUTER_MAX_MESSAGE_LEN (RH_MAX_MESSAGE_LEN - sizeof(RHRouter::RoutedMessageHeader))
|
|
//#define RH_ROUTER_MAX_MESSAGE_LEN 50
|
|
|
|
// These allow us to define a simulated network topology for testing purposes
|
|
// See RHRouter.cpp for details
|
|
//#define RH_TEST_NETWORK 1
|
|
//#define RH_TEST_NETWORK 2
|
|
//#define RH_TEST_NETWORK 3
|
|
//#define RH_TEST_NETWORK 4
|
|
|
|
/////////////////////////////////////////////////////////////////////
|
|
/// \class RHRouter RHRouter.h <RHRouter.h>
|
|
/// \brief RHReliableDatagram subclass for sending addressed, optionally acknowledged datagrams
|
|
/// multi-hop routed across a network.
|
|
///
|
|
/// Manager class that extends RHReliableDatagram to define addressed messages
|
|
/// That are reliably transmitted and routed across a network. Each message is transmitted reliably
|
|
/// between each hop in order to get from the source node to the destination node.
|
|
///
|
|
/// With RHRouter, routes are hard wired. This means that each node must have programmed
|
|
/// in it how to reach each of the other nodes it will be trying to communicate with.
|
|
/// This means you must specify the next-hop node address for each of the destination nodes,
|
|
/// using the addRouteTo() function.
|
|
///
|
|
/// When sendtoWait() is called with a new message to deliver, and the destination address,
|
|
/// RHRouter looks up the next hop node for the destination node. It then uses
|
|
/// RHReliableDatagram to (reliably) deliver the message to the next hop
|
|
/// (which is expected also to be running an RHRouter). If that next-hop node is not
|
|
/// the final destination, it will also look up the next hop for the destination node and
|
|
/// (reliably) deliver the message to the next hop. By this method, messages can be delivered
|
|
/// across a network of nodes, even if each node cannot hear all of the others in the network.
|
|
/// Each time a message is received for another node and retransmitted to the next hop,
|
|
/// the HOPS filed in teh header is incremented. If a message is received for routing to another node
|
|
/// which has exceed the routers max_hops, the message wioll be dropped and ignored.
|
|
/// This helps prevent infinite routing loops.
|
|
///
|
|
/// RHRouter supports messages with a dest of RH_BROADCAST_ADDRESS. Such messages are not routed,
|
|
/// and are broadcast (once) to all nodes within range.
|
|
///
|
|
/// The recvfromAck() function is responsible not just for receiving and delivering
|
|
/// messages addressed to this node (or RH_BROADCAST_ADDRESS), but
|
|
/// it is also responsible for routing other message to their next hop. This means that it is important to
|
|
/// call recvfromAck() or recvfromAckTimeout() frequently in your main loop. recvfromAck() will return
|
|
/// false if it receives a message but it is not for this node.
|
|
///
|
|
/// RHRouter does not provide reliable end-to-end delivery, but uses reliable hop-to-hop delivery.
|
|
/// If a message is unable to be delivered to an end node during to a delivery failure between 2 hops,
|
|
/// the source node will not be told about it.
|
|
///
|
|
/// Note: This class is most useful for networks of nodes that are essentially static
|
|
/// (i.e. the nodes dont move around), and for which the
|
|
/// routing never changes. If that is not the case for your proposed network, see RHMesh instead.
|
|
///
|
|
/// \par The Routing Table
|
|
///
|
|
/// The routing table is a local table in RHRouter that holds the information about the next hop node
|
|
/// address for each destination address you may want to send a message to. It is your responsibility
|
|
/// to make sure every node in an RHRouter network has been configured with a unique address and the
|
|
/// routing information so that messages are correctly routed across the network from source node to
|
|
/// destination node. This is usually done once in setup() by calling addRouteTo().
|
|
/// The hardwired routing will in general be different on each node, and will depend on the physical
|
|
/// topololgy of the network.
|
|
/// You can also use addRouteTo() to change a route and
|
|
/// deleteRouteTo() to delete a route at run time. Youcan also clear the entire routing table
|
|
///
|
|
/// The Routing Table has limited capacity for entries (defined by RH_ROUTING_TABLE_SIZE, which is 10)
|
|
/// if more than RH_ROUTING_TABLE_SIZE are added, the oldest (first) one will be removed by calling
|
|
/// retireOldestRoute()
|
|
///
|
|
/// \par Message Format
|
|
///
|
|
/// RHRouter add to the lower level RHReliableDatagram (and even lower level RH) class message formats.
|
|
/// In those lower level classes, the hop-to-hop message headers are in the RH message headers,
|
|
/// and are handled automcatically by tyhe RH hardware.
|
|
/// RHRouter and its subclasses add an end-to-end addressing header in the payload of the RH message,
|
|
/// and before the RHRouter application data.
|
|
/// - 1 octet DEST, the destination node address (ie the address of the final
|
|
/// destination node for this message)
|
|
/// - 1 octet SOURCE, the source node address (ie the address of the originating node that first sent
|
|
/// the message).
|
|
/// - 1 octet HOPS, the number of hops this message has traversed so far.
|
|
/// - 1 octet ID, an incrementing message ID for end-to-end message tracking for use by subclasses.
|
|
/// Not used by RHRouter.
|
|
/// - 1 octet FLAGS, a bitmask for use by subclasses. Not used by RHRouter.
|
|
/// - 0 or more octets DATA, the application payload data. The length of this data is implicit
|
|
/// in the length of the entire message.
|
|
///
|
|
/// You should be careful to note that there are ID and FLAGS fields in the low level per-hop
|
|
/// message header too. These are used only for hop-to-hop, and in general will be different to
|
|
/// the ones at the RHRouter level.
|
|
///
|
|
/// \par Testing
|
|
///
|
|
/// Bench testing of such networks is notoriously difficult, especially simulating limited radio
|
|
/// connectivity between some nodes.
|
|
/// To assist testing (both during RH development and for your own networks)
|
|
/// RHRouter.cpp has the ability to
|
|
/// simulate a number of different small network topologies. Each simulated network supports 4 nodes with
|
|
/// addresses 1 to 4. It operates by pretending to not hear RH messages from certain other nodes.
|
|
/// You can enable testing with a \#define TEST_NETWORK in RHRouter.h
|
|
/// The sample programs rf22_mesh_* rely on this feature.
|
|
///
|
|
/// Part of the Arduino RH library for operating with HopeRF RH compatible transceivers
|
|
/// (see http://www.hoperf.com)
|
|
class RHRouter : public RHReliableDatagram
|
|
{
|
|
public:
|
|
|
|
/// Defines the structure of the RHRouter message header, used to keep track of end-to-end delivery parameters
|
|
typedef struct
|
|
{
|
|
uint8_t dest; ///< Destination node address
|
|
uint8_t source; ///< Originator node address
|
|
uint8_t hops; ///< Hops traversed so far
|
|
uint8_t id; ///< Originator sequence number
|
|
uint8_t flags; ///< Originator flags
|
|
// Data follows, Length is implicit in the overall message length
|
|
} RoutedMessageHeader;
|
|
|
|
/// Defines the structure of a RHRouter message
|
|
typedef struct
|
|
{
|
|
RoutedMessageHeader header; ///< end-to-end delivery header
|
|
uint8_t data[RH_ROUTER_MAX_MESSAGE_LEN]; ///< Application payload data
|
|
} RoutedMessage;
|
|
|
|
/// Values for the possible states for routes
|
|
typedef enum
|
|
{
|
|
Invalid = 0, ///< No valid route is known
|
|
Discovering, ///< Discovering a route (not currently used)
|
|
Valid ///< Route is valid
|
|
} RouteState;
|
|
|
|
/// Defines an entry in the routing table
|
|
typedef struct
|
|
{
|
|
uint8_t dest; ///< Destination node address
|
|
uint8_t next_hop; ///< Send via this next hop address
|
|
uint8_t state; ///< State of this route, one of RouteState
|
|
} RoutingTableEntry;
|
|
|
|
/// Constructor.
|
|
/// \param[in] driver The RadioHead driver to use to transport messages.
|
|
/// \param[in] thisAddress The address to assign to this node. Defaults to 0
|
|
RHRouter(RHGenericDriver& driver, uint8_t thisAddress = 0);
|
|
|
|
/// Initialises this instance and the radio module connected to it.
|
|
/// Overrides the init() function in RH.
|
|
/// Sets max_hops to the default of RH_DEFAULT_MAX_HOPS (30)
|
|
bool init();
|
|
|
|
/// Sets the max_hops to the given value
|
|
/// This controls the maximum number of hops allowed between source and destination nodes
|
|
/// Messages that are not delivered by the time their HOPS field exceeds max_hops on a
|
|
/// routing node will be dropped and ignored.
|
|
/// \param [in] max_hops The new value for max_hops
|
|
void setMaxHops(uint8_t max_hops);
|
|
|
|
/// Adds a route to the local routing table, or updates it if already present.
|
|
/// If there is not enough room the oldest (first) route will be deleted by calling retireOldestRoute().
|
|
/// \param [in] dest The destination node address. RH_BROADCAST_ADDRESS is permitted.
|
|
/// \param [in] next_hop The address of the next hop to send messages destined for dest
|
|
/// \param [in] state The satte of the route. Defaults to Valid
|
|
void addRouteTo(uint8_t dest, uint8_t next_hop, uint8_t state = Valid);
|
|
|
|
/// Finds and returns a RoutingTableEntry for the given destination node
|
|
/// \param [in] dest The desired destination node address.
|
|
/// \return pointer to a RoutingTableEntry for dest
|
|
RoutingTableEntry* getRouteTo(uint8_t dest);
|
|
|
|
/// Deletes from the local routing table any route for the destination node.
|
|
/// \param [in] dest The destination node address
|
|
/// \return true if the route was present
|
|
bool deleteRouteTo(uint8_t dest);
|
|
|
|
/// Deletes the oldest (first) route from the
|
|
/// local routing table
|
|
void retireOldestRoute();
|
|
|
|
/// Clears all entries from the
|
|
/// local routing table
|
|
void clearRoutingTable();
|
|
|
|
/// If RH_HAVE_SERIAL is defined, this will print out the contents of the local
|
|
/// routing table using Serial
|
|
void printRoutingTable();
|
|
|
|
/// Sends a message to the destination node. Initialises the RHRouter message header
|
|
/// (the SOURCE address is set to the address of this node, HOPS to 0) and calls
|
|
/// route() which looks up in the routing table the next hop to deliver to and sends the
|
|
/// message to the next hop. Waits for an acknowledgement from the next hop
|
|
/// (but not from the destination node (if that is different).
|
|
/// \param [in] buf The application message data
|
|
/// \param [in] len Number of octets in the application message data. 0 is permitted
|
|
/// \param [in] dest The destination node address
|
|
/// \param [in] flags Optional flags for use by subclasses or application layer,
|
|
/// delivered end-to-end to the dest address. The receiver can recover the flags with recvFromAck().
|
|
/// \return The result code:
|
|
/// - RH_ROUTER_ERROR_NONE Message was routed and delivered to the next hop
|
|
/// (not necessarily to the final dest address)
|
|
/// - RH_ROUTER_ERROR_NO_ROUTE There was no route for dest in the local routing table
|
|
/// - RH_ROUTER_ERROR_UNABLE_TO_DELIVER Not able to deliver to the next hop
|
|
/// (usually because it dod not acknowledge due to being off the air or out of range
|
|
uint8_t sendtoWait(uint8_t* buf, uint8_t len, uint8_t dest, uint8_t flags = 0);
|
|
|
|
/// Similar to sendtoWait() above, but spoofs the source address.
|
|
/// For internal use only during routing
|
|
/// \param [in] buf The application message data.
|
|
/// \param [in] len Number of octets in the application message data. 0 is permitted.
|
|
/// \param [in] dest The destination node address.
|
|
/// \param [in] source The (fake) originating node address.
|
|
/// \param [in] flags Optional flags for use by subclasses or application layer,
|
|
/// delivered end-to-end to the dest address. The receiver can recover the flags with recvFromAck().
|
|
/// \return The result code:
|
|
/// - RH_ROUTER_ERROR_NONE Message was routed and deliverd to the next hop
|
|
/// (not necessarily to the final dest address)
|
|
/// - RH_ROUTER_ERROR_NO_ROUTE There was no route for dest in the local routing table
|
|
/// - RH_ROUTER_ERROR_UNABLE_TO_DELIVER Noyt able to deliver to the next hop
|
|
/// (usually because it dod not acknowledge due to being off the air or out of range
|
|
uint8_t sendtoFromSourceWait(uint8_t* buf, uint8_t len, uint8_t dest, uint8_t source, uint8_t flags = 0);
|
|
|
|
/// Starts the receiver if it is not running already.
|
|
/// If there is a valid message available for this node (or RH_BROADCAST_ADDRESS),
|
|
/// send an acknowledgement to the last hop
|
|
/// address (blocking until this is complete), then copy the application message payload data
|
|
/// to buf and return true
|
|
/// else return false.
|
|
/// If a message is copied, *len is set to the length..
|
|
/// If from is not NULL, the originator SOURCE address is placed in *source.
|
|
/// If to is not NULL, the DEST address is placed in *dest. This might be this nodes address or
|
|
/// RH_BROADCAST_ADDRESS.
|
|
/// This is the preferred function for getting messages addressed to this node.
|
|
/// If the message is not a broadcast, acknowledge to the sender before returning.
|
|
/// \param[in] buf Location to copy the received message
|
|
/// \param[in,out] len Available space in buf. Set to the actual number of octets copied.
|
|
/// \param[in] source If present and not NULL, the referenced uint8_t will be set to the SOURCE address
|
|
/// \param[in] dest If present and not NULL, the referenced uint8_t will be set to the DEST address
|
|
/// \param[in] id If present and not NULL, the referenced uint8_t will be set to the ID
|
|
/// \param[in] flags If present and not NULL, the referenced uint8_t will be set to the FLAGS
|
|
/// (not just those addressed to this node).
|
|
/// \return true if a valid message was recvived for this node copied to buf
|
|
bool recvfromAck(uint8_t* buf, uint8_t* len, uint8_t* source = NULL, uint8_t* dest = NULL, uint8_t* id = NULL, uint8_t* flags = NULL);
|
|
|
|
/// Starts the receiver if it is not running already.
|
|
/// Similar to recvfromAck(), this will block until either a valid message available for this node
|
|
/// or the timeout expires.
|
|
/// \param[in] buf Location to copy the received message
|
|
/// \param[in,out] len Available space in buf. Set to the actual number of octets copied.
|
|
/// \param[in] timeout Maximum time to wait in milliseconds
|
|
/// \param[in] source If present and not NULL, the referenced uint8_t will be set to the SOURCE address
|
|
/// \param[in] dest If present and not NULL, the referenced uint8_t will be set to the DEST address
|
|
/// \param[in] id If present and not NULL, the referenced uint8_t will be set to the ID
|
|
/// \param[in] flags If present and not NULL, the referenced uint8_t will be set to the FLAGS
|
|
/// (not just those addressed to this node).
|
|
/// \return true if a valid message was copied to buf
|
|
bool recvfromAckTimeout(uint8_t* buf, uint8_t* len, uint16_t timeout, uint8_t* source = NULL, uint8_t* dest = NULL, uint8_t* id = NULL, uint8_t* flags = NULL);
|
|
|
|
protected:
|
|
|
|
/// Lets sublasses peek at messages going
|
|
/// past before routing or local delivery.
|
|
/// Called by recvfromAck() immediately after it gets the message from RHReliableDatagram
|
|
/// \param [in] message Pointer to the RHRouter message that was received.
|
|
/// \param [in] messageLen Length of message in octets
|
|
virtual void peekAtMessage(RoutedMessage* message, uint8_t messageLen);
|
|
|
|
/// Finds the next-hop route and sends the message via RHReliableDatagram::sendtoWait().
|
|
/// This is virtual, which lets subclasses override or intercept the route() function.
|
|
/// Called by sendtoWait after the message header has been filled in.
|
|
/// \param [in] message Pointer to the RHRouter message to be sent.
|
|
/// \param [in] messageLen Length of message in octets
|
|
virtual uint8_t route(RoutedMessage* message, uint8_t messageLen);
|
|
|
|
/// Deletes a specific rout entry from therouting table
|
|
/// \param [in] index The 0 based index of the routing table entry to delete
|
|
void deleteRoute(uint8_t index);
|
|
|
|
/// The last end-to-end sequence number to be used
|
|
/// Defaults to 0
|
|
uint8_t _lastE2ESequenceNumber;
|
|
|
|
/// The maximum number of hops permitted in routed messages.
|
|
/// If a routed message would exceed this number of hops it is dropped and ignored.
|
|
uint8_t _max_hops;
|
|
|
|
private:
|
|
|
|
/// Temporary mesage buffer
|
|
static RoutedMessage _tmpMessage;
|
|
|
|
/// Local routing table
|
|
RoutingTableEntry _routes[RH_ROUTING_TABLE_SIZE];
|
|
};
|
|
|
|
/// @example rf22_router_client.pde
|
|
/// @example rf22_router_server1.pde
|
|
/// @example rf22_router_server2.pde
|
|
/// @example rf22_router_server3.pde
|
|
#endif
|