FastclockMasterESP8266RF/src/display.cpp

#include <Arduino.h>
#include <U8g2lib.h>
#include <Wire.h>

#include "display.h"


// display
U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ 16, /* clock=*/ 5, /* data=*/ 4);

#define LOGO16_GLCD_HEIGHT 16
#define LOGO16_GLCD_WIDTH  16
static const unsigned char PROGMEM logo16_glcd_bmp[] =
{ 0x00, 0xc0, // B00000000, B11000000,
  0x01, 0xc0, // B00000001, B11000000,
  0x01, 0xc0, // B00000001, B11000000,
  0x03, 0xe0, // B00000011, B11100000,
  0xf3, 0xe0, // B11110011, B11100000,
  0xfe, 0xf8, // B11111110, B11111000,
  0x7e, 0xff, // B01111110, B11111111,
  0x33, 0x9f, // B00110011, B10011111,
  0x1f, 0xfc, // B00011111, B11111100,
  0x0d, 0x70, // B00001101, B01110000,
  0x1b, 0xa0, // B00011011, B10100000,
  0x3f, 0xe0, // B00111111, B11100000,
  0x3f, 0xf0, // B00111111, B11110000,
  0x7c, 0xf0, // B01111100, B11110000,
  0x70, 0x70, // B01110000, B01110000,
  0x00, 0x30  // B00000000, B00110000
};


void Display::setSmallTextSize(void) { u8g2.setFont(/*u8g2_font_profont10_tf*/ u8g2_font_4x6_tf ); }
int Display::getTextHeight(void) { return u8g2.getMaxCharHeight(); }
int Display::getTextCharsPerLine(void) { return u8g2.getDisplayWidth() / u8g2.getMaxCharWidth(); }

void Display::setNormalTextSize(void) { u8g2.setFont(/*u8g2_font_t0_11_tf*/ u8g2_font_mozart_nbp_tf); }
//static uint8_t getNormalTextHeight() { return Org_01.yAdvance; }
//static uint8_t getNormalTextCharsPerLine() { return 24; }

void Display::setLargeTextSize(void) { u8g2.setFont(u8g2_font_9x15B_tf); }
//static uint8_t getLargeTextHeight() { return FreeMonoBold9pt7b.yAdvance; }
//static uint8_t getLargeTextCharsPerLine() { return 12; }

Display::Display() {
  currentScreen = NoScreen;
  numberLogLines = 0;
  setClockName("noname");
  setClockSpeed("---");
  setTime(5, 0);
  setClockWeekday("Mon");
  setClockHalted(true);
  setNumberKnownClients(0);
  for (int i=0; i<MAX_NUMBER_CLIENTS_DISPLAYED; ++i) setClientName(i, "---");
}

void Display::begin(void) {
  u8g2.begin();
  u8g2.setPowerSave(0);
  setLargeTextSize();
  u8g2.drawStr(0,16,"Booting FastClock");
  u8g2.sendBuffer();
  delay(200);
  //addLogMessage("Display initialized");
}

bool Display::showBootSequenceFinished(unsigned int ms_per_step) {
  static int step = 0;
  static unsigned long lastStep_ms = 0;

  if (step > 4) return true; // all is done; the value "4" corresponds to the number of steps in following case statement!
  if (ms_per_step > millis() - lastStep_ms) return false; // do nothing, if last step execution is not long enough ago
  Serial.print("showBootSequence: step="); Serial.println(step);
  lastStep_ms = millis();

  switch (step) {
    case 0:
      currentScreen = BootSequenceScreen;
      break;
    case 1:
      u8g2.drawPixel(100, 10);
      u8g2.drawPixel(102, 12);
      u8g2.drawPixel(104, 14);
      u8g2.drawPixel(106, 16);
      u8g2.sendBuffer();
      break;
    case 2:
      u8g2.drawLine(100, u8g2.getDisplayHeight()-1, u8g2.getDisplayWidth()-1, u8g2.getDisplayHeight()/2);
      u8g2.drawCircle(u8g2.getDisplayWidth()-20, u8g2.getDisplayHeight()-10, 10, U8G2_DRAW_UPPER_LEFT | U8G2_DRAW_LOWER_RIGHT);
      u8g2.sendBuffer();
      break;
    case 3:
      u8g2.drawXBMP(60, 0, 16, 16, logo16_glcd_bmp);
      u8g2.sendBuffer();
      break;
    case 4:
      break; // empty step to be sure, that last step is displayed long enough
    // if you add a step, then you need to change the condition at the beginning of this method as well (if (step > ...)
    default: // do nothing
      break;
  }
  ++step;
  return false;
}

void Display::showLog(void) {
  currentScreen = LogScreen;
  u8g2.clearBuffer();
  u8g2.setDrawColor(1);
  setSmallTextSize();
  for (int i=0; i<MAX_NUMBER_LOG_LINES; ++i) {
    u8g2.setCursor(0, i * getTextHeight());
    u8g2.print(logLine[i]);
  }
  u8g2.sendBuffer();
}

void Display::addLogMessage(const char *message) {
  if (numberLogLines >= MAX_NUMBER_LOG_LINES) {
    for (int i=0; i<MAX_NUMBER_LOG_LINES-1; ++i) memcpy(logLine[i], logLine[i+1], MAX_LOG_MESSAGE_LEN);
    --numberLogLines;
  }
  strncpy(logLine[numberLogLines++], message, MAX_LOG_MESSAGE_LEN);
  if (currentScreen == LogScreen) showLog();
  Serial.println(message);
}


void Display::showDashboard(void) {
  static unsigned long lastDisplayUpdate_ms = 0;

  currentScreen = DashboardScreen;
  // avoid flickering of the display:
  if (millis() - lastDisplayUpdate_ms < TIME_BETWEEN_DISPLAY_UPDATES_ms) return;
  lastDisplayUpdate_ms = millis();
  
  u8g2.clearBuffer();
  u8g2.setDrawColor(1);

  // ***** clock name *****
  setNormalTextSize();
  u8g2.setCursor(0, getTextHeight()-1);
  u8g2.print(clockName);

  // ****** speed *****
  setNormalTextSize();
  u8g2.setCursor(55, 2*getTextHeight()-1);
  u8g2.print(clockSpeed);

  // ***** time *****
  setLargeTextSize();
  u8g2.setCursor(0, u8g2.getDisplayHeight()-1);
  if (clockHour < 10) u8g2.print("0");
  u8g2.print(clockHour);
  u8g2.print(":");
  if (clockMinute < 10) u8g2.print("0");
  u8g2.print(clockMinute);

  // ***** halt/go *****
  if (clockHalted) {
    setSmallTextSize();
    u8g2.setDrawColor(1);
    u8g2.drawBox(55, u8g2.getDisplayHeight() - 2*getTextHeight()-3, 5*4+2, getTextHeight());
    u8g2.setDrawColor(0);
    u8g2.setCursor(57, u8g2.getDisplayHeight() - getTextHeight()-3);
    u8g2.print("HALT");
    u8g2.setDrawColor(1);
  }

  // **** weekday *****
  setSmallTextSize();
  u8g2.setCursor(60, u8g2.getDisplayHeight());
  u8g2.print(clockWeekday);

  // ***** # of clients *****
  setSmallTextSize();
  u8g2.setCursor(55, getTextHeight());
  u8g2.print(numberKnownClients); u8g2.print(" -->");

  // ***** client list *****
  u8g2.drawVLine(79, 0, u8g2.getDisplayHeight());
  for (int i=0; i<5; ++i) {
    u8g2.setDrawColor(1);
    u8g2.drawBox(81, i * getTextHeight(), 3*3+1, getTextHeight());
    u8g2.setCursor(82, (i+1) * getTextHeight());
    u8g2.setDrawColor(0);
    if (i < 10) u8g2.print(0);
    u8g2.print(i);
    u8g2.setDrawColor(1);
    u8g2.setCursor(82+3*3+1+1, (i+1) * getTextHeight());
    u8g2.print(clientName[i]);
  }
  u8g2.sendBuffer();
}